For a list of the available buttons for:

￿Media feature, see “Using the Media Main Menu” on page 83.

￿Media Center Green Start button features, see “Using the Media Center Green Start Button” on page 44.

For a list of the buttons available to operate a programmed device, see “Operating a DVD Player or Other Device” on page 46.

Selecting the InputSource

1Press the Source button on the remote control, or on the TV, to open the list of input sources.

2 Press the Up or Down Arrow button on the remote control, or press the Channel buttons on the TV, to select the input source to view.

3Press OK on the remote control, or press Select on the TV.

Or

Press the Source button again to close the list of input sources without changing the source.

The list of input sources identifies a connector set on the rear of the TV:

￿Antenna or Cable is the ANT/Cable In connector. The label shows the scan source selection (Antenna or Cable) of the last channel scan performed by either the Setup Wizard or the Channel menu.

￿AV1 is the Standard Definition Input AV Input 1 connector set of S-Vid or Video.

￿AV2 is the Standard Definition Input AV Input 2 connector set of S-Vid or Video.

￿Component 1 is the Component High Definition Input 1 connector set.

￿Component 2 is the Component High Definition Input 2 connector set.

￿HDMI 1 is the Digital High Definition Input connector HDMI 1.

￿HDMI 2 is the Digital High Definition Input connector HDMI 2.

￿HDMI 3 is the Digital High Definition Input connector HDMI 3.

￿PC is the PC Input (VGA) connector set.

￿MediaSmart shows the Media main menu as if you pressed the Media button.

You can change all the labels except Antenna (or Cable) and MediaSmart. Use the OSD Setup menu to change the label in the source list; see “Changing the input labels” on page 80.

Selecting the last source

Press the Last Source button on the remote control to change the input source to the last viewed source.

Adjusting the Volume

To increase or decrease the sound level, press:

￿The remote control Volume buttons.

Or

The TV Volume buttons.

The indicator bar on the TV shows the increase or decrease in volume.

Muting the sound

1Press the Mute button on the remote control to temporarily turn off the sound.

2Press the Mute button again to restore the sound back to the previous level.

40HP MediaSmart HDTV User Guide