Using the First-Time Setup WizardInitial TV setup

When you turn on the TV for the first time, a first-time Setup Wizard guides you through the following tasks.

￿Setting the onscreen display language.

￿Setting the clock mode (if manual, enter the time zone, date, and time).

￿Selecting a signal source.

￿Searching the TV signal source (antenna or cable) and memorizing the available TV channels. (Wait while the channel search operation automatically searches for a signal from all available channels on the ANT/Cable connector).

You can start the Setup Wizard by using the OSD Setup menu; see “Starting the Setup Wizard” on page 80.

Preparing

Complete the following steps before you press the Power button on the remote control:

1Insert the batteries into the remote control.

2Connect the signal source antenna or cable to the TV.

3Plug the AC power cord into the AC outlet.

4Turn on the TV.

Selecting or entering items during initial TV setup

Press the Arrow buttons on the remote control to select the desired item, and then press the OK button.

n

To view high-definition programming, you must have connected to the TV a high-definition signal source such as an off-the-air high-definition antenna or cable HD signal, a cable or satellite provider HD set-top box, or an HD-DVD player. All sources except an HD antenna or cable HD signal must connect to one of the High Definition Input connector sets on the TV.

You may view high-definition digital media through your home network.

Next steps

This completes the initial TV setup.

To prepare the TV for using digital media (the Media button on the remote control), continue with “Setting Up the TV for Digital Media” on page 27.

26HP MediaSmart HDTV User Guide