￿If you are using the TV ANT/Cable connector:

￿Connect the signal source to the ANT/Cable connector; see “Connecting the cable TV or off-the-air broadcast antenna” on page 11.

￿Connect cables from the TV Audio Output (either digital optical or analog stereo, or both) to the A/V receiver input.

￿If the A/V receiver does not support Digital Dolby, set the digital audio format to PCM by using the Digital Audio option in the Audio menu on the OSD; see “Choosing the digital audio output mode” on page 71.

To program the TV universal remote to control all the devices, see “Programming the Remote Control for a Home Entertainment Device” on page 50.

Powered speakers or amplifier

When you have powered speakers or a stereo amplifier, do the following:

￿Route the audio and video from all source devices to the TV.

￿Connect audio cables from the TV Audio Output (either digital optical or analog stereo, or both) to the powered speakers or amplifier input.

￿Use the TV remote control to select the input source.

￿Set the digital audio format to PCM by using the Digital Audio option in the Audio menu on the OSD; see “Choosing the digital audio output mode” on page 71.

￿Select the input on the powered speakers or amplifier.

￿Use the source device remote control to control playback.

￿If you are using the TV ANT/Cable connector:

￿Connect the signal source to the ANT/Cable connector; see “Connecting the cable TV or off-the-air broadcast antenna” on page 11.

￿If the powered speakers or amplifier does not support Digital Dolby, set the digital audio format to PCM by using the Digital Audio option in the Audio menu on the OSD; see “Choosing the digital audio output mode” on page 71.

￿For HDMI source devices, connect a separate digital audio cable from the source device directly to the powered speakers or amplifier. If the powered speakers cannot access a second input, use analog output from the TV. This TV does not support Dolby Digital audio input over HDMI, and it does not output a digital audio signal from HDMI input.

To program the TV universal remote to control all the devices, see “Programming the Remote Control for a Home Entertainment Device” on page 50.

20HP MediaSmart HDTV User Guide