3Insert the cable clamp from the box into the square hole on the rear of the TV.

4Route the cables through the cable clamp.

Removing or attaching the stand

Your TV comes with the stand attached. Reverse these steps to attach the stand.

c

CAUTION: Use two people to disassemble or assemble the TV.

Before removing the stand, unplug the AC power cord from the AC power outlet, and remove any cabling.

1Carefully place the TV panel with the glass screen facing downward on a padded, stable table with the TV stand extended over the edge of the table.

w

WARNING: Do not allow the stand to drop onto the TV panel.

2Remove the four long screws that secure the stand (pedestal) to the rear of the TV, and then lift off the stand.

Setting Up the TV

Setting Up the TV 23