HP CQ41-225TX, CQ41-205TX, CQ41-204TX, CQ41-207TX, CQ41-224TX, CQ41-223TX, CQ41-213TU Display assembly

Removal and replacement procedures

Display assembly

✎The display assembly spare part kit includes two WLAN antenna transceivers and cables, webcam (select models only), microphone, nameplate, and logo.

Description	Spare part number
14.1-in WXGA BrightView display with a microphone for models with discrete and UMA graphics	580763-001
subsystems
14.1-in WXGA BrightView display with a webcam/microphone for models with discrete and UMA	580766-001
graphics subsystems

Before removing the display assembly:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer.

4.Remove the battery (see “Battery” on page 4-7).

5.Disconnect the wireless antenna cables from the WLAN module (see “WLAN module” on page 4-14).

6.Remove the following components:

a.Hard drive cover (see “Hard drive” on page 4-8)

b.Mini Card compartment cover (see “RTC battery” on page 4-12)

c.Optical drive (see “Optical drive” on page 4-20

d.Keyboard (see “Keyboard” on page 4-21)

e.Keyboard cover (see “Keyboard cover” on page 4-23)

f.Speaker assembly (see “Speaker assembly” on page 4-25)

Maintenance and Service Guide 4–27