Removal and replacement procedures
Modem module
Description | Spare part number |
|
|
All countries and regions except Australia and New Zealand | |
|
|
Australia and New Zealand | |
|
|
Before removing the modem module:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer.
4.Remove the battery (see “Battery” on page
5.Remove the following components:
6.
a.Hard drive (see “Hard drive” on page
b.Mini Card compartment cover (see “RTC battery” on page
c.Mini Card bracket (see “WLAN module” on page
d.Optical drive (see “Optical drive” on page
e.Keyboard (see “Keyboard” on page
f.Keyboard cover (see “Keyboard cover” on page
g.Speaker assembly (see “Speaker assembly” on page
h.Display assembly (see “Display assembly” on page
i.Top cover (see “Top cover” on page
Maintenance and Service Guide |