HP Armada e500 Select Start, Entering a Power-OnPassword, 1.Turn on or restart the computer, 2.Enter your new password twice, then click OK

Establishing the Power-On Password in Windows 2000 Professional

The power-on password prevents unauthorized use of the computer when it is turned on or resumed from Suspend, Hibernation, or QuickLock/QuickBlank.

CAUTION: You cannot use the computer if you forget your power-on password. Therefore Compaq recommends that you record your password and put it in a safe place.

1.Select Start⊕Settings⊕Control Panel, double click the Passwords icon and click the Set button under Power-On Password.

or

Right-click the Compaq Computer Security icon on the system tray, click Password Properties and click the Set button under Power-On Password.

2.Enter your new password twice, then click OK.

IMPORTANT: Type carefully, because the password is not displayed as you type. The password is not case sensitive. However, you must use the same keys each time you enter the password. For example, the numbers at the top of the keyboard are not recognized as being the same as the numbers in the embedded numeric keypad.

3.You may enter up to seven alphanumeric characters for the password. The next time you restart the computer or resume from Hibernation, Suspend, or QuickLock/QuickBlank, you will be prompted to enter your power-on password.

Entering a Power-On Password1.Turn on or restart the computer.2.At the password prompt, type your power-on password.

If you enter the password incorrectly, an incorrect password prompt displays. Try again to enter the password. After three unsuccessful attempts, you must turn the computer off and back on again before you can continue.

NOTE: The password is not case sensitive. However, you must use the same keys each time you enter the password. For example, the numbers at the top of the keyboard are not recognized as being the same as the numbers in the embedded numeric keypad.

13-4Security Features