HP Armada e500 F2, F1, F10, NOTE:, Fn+Shift, Fn+Num Lk, upper-right, on the screen, Enabling the Keypad at Startup, when the blinking cursor appears

Operating the Keypad Keys as Standard Keys

To use the embedded numeric keypad keys as standard keyboard keys while the keypad is enabled:

■Press and hold Fn to use the keys as you would when typing in lowercase.■Press and hold Fn+Shift to use the keys as you would when typing in uppercase.Enabling the Keypad at Startup■To set the computer to start up with the embedded numeric keypad enabled—

1.Turn on or restart the computer, then press F10 when the blinking cursor appears upper-right on the screen.

■✴❏ ❃❈❁■❇❅ ▼❈❅ ●❁■❇◆❁❇❅✌F2. ❐❒❅▲▲■✦❏❒ ■❁❖❉❇❁▼❉❏■ ❉■▲▼❒◆❃▼❉❏■▲✌F1.❐❒❅▲▲2.Select Advanced ⊕Δεϖιχε Οπτιονσ,Enter. τηεν3.Toggle the field beside Num Lock State at Boot to On, then press F10.4.To save your preferences, then close Computer Setup andrestart the computer, select File⊕Σαϖε Χηανγεσ α τηεν Enterπρεσσ.5. When you are prompted to confirm your action, press F10.

■To disable the embedded numeric keypad at startup— Repeat the above procedure with the Num Lock State at Boot field toggled Off.

NOTE: The embedded numeric keypad can be enabled or disabled with Fn+Num Lk in either startup state.

Using the Keyboard 2-11