HP i2000 Keypad Lock, Press, Press, Light Sensor, 6Press ounder “Ok”, •Unlock the keypad, 7Press ounder “Exit”, •Turn your phone On/Off

6Press ounder “Ok”.

7Press ounder “Exit”.

When the PIN is enabled, you are prompted to enter your PIN each time you turn on your i2000 phone. Until a valid PIN is entered, you can use the phone only to make emergency calls depending on the network.

After the PIN is accepted, the Phone Ready screen displays.

a b

Enter

SIM PIN

Incorrectly entering your PIN three times causes the phone to be blocked. To unblock your phone, you must contact Nextel Customer Care. For more information, see “Unblocking the PIN” on page 16.

Light Sensor

On your i2000 phone, when a key is pressed, the light sensor will activate the backlight only when your phone is in poor lighting conditions. If illumination is needed, even when the backlight is disabled, you can manually override the sensor by pressing and holding the nkey. This will activate the backlight. If the phone is in a charger, the backlight will always be illuminated.

Keypad Lock

The i2000 phone includes a Keypad Lock feature that enables you to quickly lock the phone’s keypad to avoid inadvertently pressing keys or placing calls. Once Keypad Lock is activated, you can only perform the following tasks (unless you receive an incoming call, page, etc.):

•Turn your phone On/Off•Unlock the keypad

NOTE: Before locking your phone’s keypad, you may want to read this entire section to learn how to respond to incoming calls, pages, etc.

www.nextel.com

18