Accessories

Cigarette Lighter Adaptor Operating Specifications

Operating voltage range: 10.8 - 33.0 Vdc.

Operating temperature range: -30°C to +60°C

Desktop Dual-Pocket Charger

The NTN1627 Desktop Dual-Pocket Charger charges Motorola authorized batteries, as listed on page 91, for the i2000 phone.

Front Pocket

Rear Pocket

LED

Indicators

Figure4.

Pin Connector

Power Supply Cord

1Plug the flat end of the power-supply cord, with the logo facing down, into the receptacle labeled “Charging” on the back of the charger.

2Plug the transformer end of the power-supply cord into any standard AC wall outlet.

3Insert an i2000 phone with an attached battery, into the charger’s front pocket. This is done by inserting the bottom of the i2000 phone into the pin connector in the bottom of the charger’s front pocket.

4If the i2000 phone is properly seated in the front pocket, the charger’s front pocket LED indicator will light green to indicate that the battery is being charged. If a battery is in the rear pocket and the i2000 phone with a battery is inserted into the front pocket, the battery in the front pocket will charge to full capacity before the battery in the rear pocket is charged. The LED for the rear pocket will flash yellow, indicating that its battery is waiting to be charged.

5The charger has the capability of displaying the battery’s charge status. The indicator will show the following: solid red=1-30%; solid yel- low=31-60%; flashing green=61-90%; solid green=91-100%.

95