You can store up to 100 names, phone numbers and private IDs using the following steps:
1Press nuntil you see the “Prgm” option.
2Press ounder “Prgm”. Then press 2then 0.
3The message: 20=Phone / Prvt List displays.
Press ounder “Ok”. The next screen displays the remaining number of phone numbers and Private IDs that you can store. The phone will then display the Enter Name screen.
4Enter the name of the individual you want to store.
(Notice, each key has a number and several letters. To select different
letters on a key, quickly press the key until the desired letter
displays. For example, to enter the letter Y you must press the 9key 3 times quickly. Also, you can press and hold #to change the case of the letter you just entered (lower to upper and upper to lower case). The default style is upper case.)
NOTE: Press lto delete a letter. Press rto insert a space.
After you have entered the name, press ounder “Store”.
5Enter Phone Number displays. Enter the area and phone number. Also, you may use the Plus Dialing and/or Pause Digit Entry at this screen. Refer to “Pause Digit Entry” on page 28 and/or “Plus Dialing” on page 35.
Press ounder “Store”.
6The name and Spd# = displays. The system automatically assigns a
speed dial number, which you can change by entering a new number. Press ounder “Store”.
7Enter PrvtID displays. Enter the person’s Direct Connect private ID. Press ounder “Store”.
8Repeat steps 3 through 7 to add additional names/numbers.
9Press ounder “Exit”.
27