Displaying Your Private ID

1Press nuntil you see the “Prgm” menu selection.

2Press ounder “Prgm” and press 2.

3Press ounder “Exit”.

Using the Private/Group Speaker

You can enable or disable the speaker on your i2000 phone for Direct Connect use. When the speaker is on, the caller’s voice can be heard over the speaker. When the speaker is off, the caller’s voice can only be heard through the earpiece of your phone.

Turning the Speaker On

Press k.

Turning the Speaker Off

Press k. pwill appear on your display. A brief alert tone will notify you of incoming Private or Group calls.

Placing Private Calls

From Private Mode, there are also two ways to reach an individual using Direct Connect. You can enter the person’s Private ID number then press the Push-To- Talk button. Or, you can store the person’s name and private ID number, then recall the number from a stored list. Whether you dial the person’s private ID directly or store it in a list--you must have the individual’s private ID to use Direct Connect. To learn how to store names and numbers, see “Storing Names and Numbers” on page 26 if you haven’t done so already.

Entering the Private ID

1Press muntil you see Prvt Ready.

2Enter the Private ID.

3Press and hold the Push-To-Talk button on the side of the phone to talk. Both phones will chirp before your voice can be heard.

4Release the Push-To-Talk button to listen.

www.nextel.com

74