HP J3188A manual Mount the hub, Rack or Cabinet Mounting

Installing the Hub

Installing and Configuring Your Hub

4. Mount the hub

		The HP Hub-16M can be mounted in two ways:
	1.		in a rack or cabinet
	2.		on a table
		The hardware for mounting the hub is included in the accessory kit
		(5064-2053) packed with the hub. Before mounting the hub, unplug it.
		See Appendix G, “Safety and Regulatory Standards,” for general mounting
		precautions.
		Rack or Cabinet Mounting
W a r n i n g		The rack or cabinet should be adequately secured to prevent it from
		becoming unstable and/or falling over. Please see Appendix G, “Safety
		and Regulatory Standards,” for precautions and warnings associated with rack
		mounting.
	1.		Using a Phillips T-10 screwdriver, attach the mounting brackets to the hub
			with #10-32 x 7/16" silver screws (included in the accessory kit).
	2.		Position the hub in the rack or cabinet and slide it up or down until the
			rack holes line up with the bracket holes.
	3.		Then attach the hub to the rack with the #10-32 x 5/8" black screws and
			black nylon washers included in the accessory kit with a Phillips cross-
			head screwdriver. (Some cabinets require number 12-24 screws instead.

Make sure you have screws that fit your cabinet or rack before mounting the hub.)

Installing the Hub

1-5