HP manual HP 10Base-T Hub-16M J3188A, Front of the Hub, Back of the Hub, Iii

HP 10Base-T Hub-16M (J3188A)

HP 10Base-T Hub-16M (J3188A)

The HP 10Base-T Hub-16M (J3188A) is a multiport repeater with 16 twisted- pair ports, and one AUI port. With this hub, you can connect computers, printers, and servers together for file sharing. This hub is compliant with the IEEE 802.3 Type 10Base-T standard and supports both 802.3 and Ethernet networks. The HP Hub-16M follows these two standards by providing these features:

■lighting the hub’s port LED when it detects the connected device is powered on and cable is good.

■retransmitting data that did not successfully arrive at the destination device (collision detection).

■temporarily disabling a port if a device connected to the port persistently causes problems for the network (auto-partioning).

Front of the Hub

			MDI/MDI-X
System			switch for
	RPS Status	Twisted Pair port	port 16.
		status LEDs

Hub status LEDs (Fault, Security,	Twisted-pair	AUI Connector for
Collision, Activity)	ports	External
		Transceiver

Back of the Hub

RPS connector	Serial Port	Password
		Reset
		Button

iii