HP J3188A manual Status Information What It Means

Managing the Hub

Console Command Reference

■Redundant Power Supply status:

•NOT CONNECTED means the RPS is not attached to the device.

•CONNECTED/FAULT means the RPS is attached but is reporting an error.

•CONNECTED/GOOD means the RPS is attached with no errors, but has not been enabled.

•CONNECTED/GOOD/ACTIVE means the RPS is attached with no errors, and is active (the primary power supply is not operating and the RPS has been initiated as a backup system).

■a table with the port information described as follows:

	Status
	Information	What It Means
	Port	The port ID. (Additionally, bkup indicates that the port is configured as the
		backup link, pri indicates that the port is the primary link—see the Backup
		command).
	Port Status	The status of each port:
		ON means the port is enabled and is not auto-segmented.
		OFF means that the port has been disabled by the Port command or
		because of a security violation.
		PARTITIONED means the port has been auto-partitioned.
		(See “Auto-Partitioning” in the chapter that provides information on the
		Product Description.)
Hub		ON/REVERSED means that reversed wiring polarity on the receive pair has
		been detected on a twisted-pair cable and the hub has compensated.
the
	Link Beat	Informs the hub of the presence of a device connected to it over twisted-
Managing
		pair cable.
	MAC address	The unique 12-digit link-layer address for the hub. (Also called Ethernet
		address or physical address.)
	INTRUDER	The address of a device not authorized to access the hub.
	ADDRESS

3-20