|
| Managing the Hub |
|
| Console Command Reference |
|
|
|
TEstlink |
|
|
| To run a test of the link between the hub and another IEEE 802.3 | |
| device. | |
|
| |
N o t e | The destination device must be able to send an IEEE 802.2 Test Response | |
| packet upon receipt of an IEEE 802.2 Test command packet. The HP Hub- | |
| 16M will respond with the correct packet. | |
| You will be prompted for the | |
| ||
| destination device. You will then be prompted for the number of test packets | |
| to send. | |
| If any errors are reported during this test, there may be a fault on the link being | |
| tested or on the destination device. For more information about testing | |
| network links, see the chapter 2, “Troubleshooting”. | |
