Installing the Hub
Interpreting LED Status
Interpreting Port Status LEDs
The following table provides LED port information.
LED | State | Meaning of LED | |
|
|
| |
On | Link beat is detected from the attached node. | ||
Port (green) |
|
| |
Off | The port is not receiving the link beat signal from the attached | ||
| |||
|
| node. | |
|
|
| |
| Slow | The port has been | |
| Flash* | partitioned (disabled) due to excessive collisions. This port will | |
|
| reenable when the connected device no longer causes | |
|
| collisions. | |
|
|
| |
AUI | On | The AUI port is enabled. | |
Port (green) |
|
| |
Off | The AUI port is disabled. | ||
| |||
|
|
| |
| Slow | The port has been | |
| Flash |
| |
|
|
|
* The slow flash is approximately once every 1.5 seconds.
Installing the Hub
