HP Configuring the exception handling method, Configuration procedure, Banner configuration examples

Configuration procedure

Follow these steps to configure a banner:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Configure the incoming banner	header incoming text	Optional
Configure the login banner	header login text	Optional
Configure the legal banner	header legal text	Optional
Configure the shell banner	header shell text	Optional
Configure the MOTD banner	header motd text	Optional

Banner configuration examples

#Configure the shell banner as Welcome to HP!.

•Single-line input mode:

<System> system-view

[System] header shell %Welcome to HP!%

•Multiple-line input mode (method I):

<System> system-view [System] header shell

Please input banner content, and quit with the character '%'. Welcome to HP!

%

•Multiple-line input mode (method II):

<System> system-view [System] header shell W

Please input banner content, and quit with the character 'W'. Welcome to HP!

W

Configuring the exception handling method

You can configure the device to handle system exceptions in one of the following methods:

•reboot—The device automatically reboots to recover from the error condition.

•maintain—The device stays in the error condition so you can collect complete data, including error messages, for diagnosis. In this approach, you must manually reboot the device.

Follow these steps to configure the exception handling method:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Configure the exception handling		Optional
	system-failure { maintain reboot }	By default, the system reboots
method
		when an exception occurs.
	131