HP Configuring none authentication for Telnet login

Authentication	Configuration	Remarks
mode
	Configure the authentication scheme

			Configure a
			RADIUS/HWTACAC
			S scheme
		Remote AAA	Configure the AAA
			scheme used by the
		authentication	domain
	Select an		Configure the
Scheme			username and
	authenticati		password on the
	on scheme		AAA server
			Configure the
			authentication
		Local	username and
			password
		authentication
			Configure the AAA
			scheme used by the
			domain as local

For more information, see “Configuring scheme authentication for Telnet login.”

Configuring none authentication for Telnet login

Configuration prerequisites

You have logged in to the device.

By default, you can log in to the device through the console port without authentication and have user privilege level 3 after login. For information about logging in to the device with the default configuration, see “Configuration requirements.”

Configuration procedure

Follow these steps to configure none authentication for Telnet login:

To do…	Use the command…	Remarks
Enter system view	system-view	—
		Required
Enable Telnet	telnet server enable	By default, the Telnet service is
		disenabled.
Enter one or multiple VTY user	user-interface vty first-number	—
interface views	[ last-number ]
Specify the none authentication		Required
	authentication-mode none	By default, authentication mode for
mode
		VTY user interfaces is password.
Configure the command level for		Required
login users on the current user	user privilege level level	By default, the default command
interfaces		level is 0 for VTY user interfaces.
	38