HP manual 47

To do…	Use the command…	Remarks
Enter one or multiple VTY user	user-interface vty first-number	—
interface views	[ last-number ]
		Required
Specify the password	authentication-mode password	By default, authentication mode
authentication mode		for VTY user interfaces is
		password.
	set authentication password { cipher	Required
Set the local password		By default, no local password is
	simple } password
		set.
Configure the user privilege level	user privilege level level	Required
for login users		0 by default.
		Optional
Configure common settings for	—	See “Configuring common
VTY user interfaces		settings for VTY user interfaces
		(optional).”

When you log in to the device through Telnet again:

•You are required to enter the login password. A prompt such as <HP> appears after you enter the correct password and press Enter, as shown in Figure 14.

•If “All user interfaces are used, please try later!” is displayed, it means the number of current concurrent login users exceed the maximum. Please try later.

Figure 14 Configuration page

40