HP Displaying and maintaining CLI login

To do…		Use the command…	Remarks
			Optional
			The default idle-timeout is 10
			minutes. The system automatically
	Set the idle-timeout		terminates the user’s connection if
		idle-timeout minutes [ seconds ]	no information interaction occurs
	timer
			between the device and the user
			within the idle-timeout time.
			Setting idle-timeout to 0 disables the
			timer.

CAUTION:

•The common settings configured for console login take effect immediately. If you configure the common settings after you log in through the console port, the current connection may be interrupted. To avoid this problem, use another login method. After you configure the common settings for console login, you will need to modify the settings on the terminal to make them consistent with those on the device.

•The baud rate of the console port must be lower than the transmission rate of the modem. Otherwise, packets may be lost.

Displaying and maintaining CLI login

To do…	Use the command…	Remarks
Display the source IP	display telnet client configuration
address/interface specified for	[ { begin exclude include }	Available in any view
Telnet packets	regular-expression ]
Display information about the user	display users [ { begin exclude	Available in any view
interfaces that are being used	include } regular-expression ]
Displays information about all user	display users all [ { begin
	exclude include }	Available in any view
interfaces that the device supports
	regular-expression ]
	display user-interface [ num1
Display user interface information	{ aux vty } num2 ] [ summary ] [	Available in any view
	{ begin exclude include }
	regular-expression ]

64