HP Configuring scheme authentication for modem login

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enter one or more AUX user	user-interface aux first-number	—
interface views	[ last-number ]
Specify the password		Required
	authentication-mode password	By default, the authentication
authentication mode
		mode is none for modem users
	set authentication password	Required
Set the local password		By default, no local password is
	{ cipher simple } password
		set.
		Optional
Configure common settings for	—	For more information, see
VTY user interfaces		“Configuring common settings for
		VTY user interfaces (optional).”

When you log in to the device through modems after the configuration, you are prompted to enter a login password. A prompt such as <HP> appears after you input the password and press Enter, as shown in Figure 25.

Figure 25 Configuration page

Configuring scheme authentication for modem login

Configuration prerequisites

You have logged in to the device.

By default, you can log in to the device through the console port without authentication and have user privilege level 3 after login. For information about logging in to the device with the default configuration, see “Configuration requirements.”

58