HP Configuring HTTPS login

To do…	Use the command…	Remarks
		Optional
Configure the HTTP service port		80 by default.
	ip http port port-number	If you execute the command
number
		multiple times, the last one takes
		effect.
		Optional
		By default, the HTTP service is not
Associate the HTTP service with an		associated with any ACL.
	ip http acl acl-number	Associating the HTTP service with
ACL
		an ACL enables the device to allow
		only clients permitted by the ACL to
		access the device.
Create a local user and enter local		Required
	local-user user-name	By default, no local user is
user view
		configured.
Configure a password for the local	password { cipher simple }	Required
		By default, no password is
user	password
		configured for the local user.
Specify the command level of the		Required
	authorization-attribute level level	No command level is configured
local user
		for the local user.
Specify the Telnet service type for		Required
	service-type telnet	By default, no service type is
the local user
		configured for the local user.
Exit to system view	quit	—
		Required
Create a VLAN interface and enter	interface vlan-interface	If the VLAN interface already
its view	vlan-interface-id	exists, the command enters its
		view.

Assign an IP address and subnet mask to the VLAN interface

ip address ip-address{ mask mask-length}

Required

By default, no IP address is assigned to the VLAN interface.

Configuring HTTPS login

Follow these steps to configure HTTPS login:

To do…	Use the command…	Remarks
Enter system view	system-view	—

67