# Enable the HTTPS service.

[Device] ip https enable

#Create a local user named usera, set the password to 123 for the user, and specify the Telnet service type for the local user.

[Device] local-user usera [Device-luser-usera] password simple 123

[Device-luser-usera] service-type telnet

2.Configure the host that acts as the HTTPS client

On the host, run the IE browser. In the address bar, enter http://10.1.2.2/certsrv and request a certificate for the host as prompted.

3.Verify the configuration

Enter https://10.1.1.1 in the address bar, and select the certificate issued by new-ca. Then the web login page of the Device appears. On the login page, type the username usera, and password 123 to enter the web management page.

NOTE:

•To log in to the web interface through HTTPS, enter the URL address starting with https://. To log in to the web interface through HTTP, enter the URL address starting with http://.

•For more information about PKI configuration commands, see the Security Command Reference.

•For more information about the public-key local create rsa command, see the Security Command Reference.

•For more information about SSL configuration commands, see the Security Command Reference.

73