HP Configuring password authentication for modem login

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enter one or more AUX user	user-interface aux first-number	—
interface views	[ last-number ]
		Required
Specify the none authentication	authentication-mode none	By default, users that log in through
mode		the console port are not
		authenticated.
Configure common settings for VTY		Optional
	—	See “Configuring common settings
user interfaces
		for VTY user interfaces (optional).”

When you log in to the device through modems after the configuration, you are prompted to press Enter. A prompt such as <HP> appears after you press Enter, as shown in Figure 24.

Figure 24 Configuration page

Configuring password authentication for modem login

Configuration prerequisites

You have logged in to the device.

By default, you can log in to the device through the console port without authentication and have user privilege level 3 after login. For information about logging in to the device with the default configuration, see “Configuration requirements.”

Configuration procedure

Follow these steps to configure password authentication for modem login:

57