HP manual 70

To do… Use the command… Remarks

Configure the data	databits { 5 6 7	8 }
bits

Optional

By default, the data bits is 8.

Data bits is the number of bits representing one character. The setting depends on the contexts to be transmitted. For example, you can set it to 7 if standard ASCII characters are to be sent, and set it to 8 if extended ASCII characters are to be sent.

Define a shortcut		Optional
key for starting a	activation-key character	By default, you can press Enter to
session		start a session.
Define a shortcut		Optional
key for terminating	escape-key { default character }	By default, you can press Ctrl+C to
tasks		terminate a task.
Configure the flow	flow-control { hardware none	Optional
control mode	software }	By default, the value is none
		Optional
		By default, the terminal display type
		is ANSI.
		The device supports two types of
		terminal display: ANSI and VT100.
		HP recommends that you set the
		display type of both the device and
Configure the type	terminal type { ansi vt100 }	the client to VT100. If the device and
of terminal display		the client use different display types
		(for example, hyper terminal or
		Telnet terminal) or both are set to
		ANSI, when the total number of
		characters of the edited command
		line exceeds 80, an anomaly such
		as cursor corruption or abnormal
		display of the terminal display may
		occur on the client.
Configure the user		Optional
privilege level for	user privilege level level
		3 by default.
login users
Set the maximum		Optional
		By default, the next screen displays
number of lines on	screen-length screen-length
		24 lines at most.
the next screen
		A value of 0 disables the function.
Set the size of the		Optional
history command	history-command max-size value	By default, the buffer saves 10
buffer		history commands at most.

63