HP NX9040, NX9030, NX9020 Using Computer Setup, Select the Main, Security, Advanced, or Tools menu

Troubleshooting

Using Computer Setup

Information and settings in Computer Setup are accessed from the Main, Security, Advanced, or Tools menus:

1.Turn on or restart the notebook. Press f10 while the F10 = ROM-Based Setup message is displayed in the lower-left corner of the screen.

❏To change the language, use the cursor control keys to navigate to the Advanced menu.

❏To view navigation information, press f1.

❏To return to the Computer Setup menu, press esc.

2.Select the Main, Security, Advanced, or Tools menu.

3.To close Computer Setup and restart the notebook:

❏Select Exit > Exit Saving Changes, and then press enter.

- or -

❏Select Exit > Exit Discarding Changes, and then press enter.

- or -

❏ Select Exit > Load Setup Defaults, and then press enter.

4.When you are prompted to confirm your action, press f10.

2–2 Maintenance and Service Guide