HP NX9040, NX9030, NX9020, ZE4900 manual Removing a Mini PCI Communications Board

Models: NX9020

1 182
Download 182 pages 5.1 Kb
Page 96
Image 96
Removing a Mini PCI Communications Board

Removal and Replacement Procedures

Make note of which wireless antenna cable is attached to which antenna clip on the Mini PCI communications board before disconnecting the cables.

5.Disconnect the wireless antenna cables 1 from the Mini PCI communications board.

6.Spread the 2 retaining tabs 2 that secure the Mini PCI communications board to the communications compartment socket. (The board rises up).

7.Remove the wireless communications board by pulling the board away from the socket at a 45-degree angle 3.

Removing a Mini PCI Communications Board

Reverse the above procedure to install a Mini PCI communications board.

Maintenance and Service Guide

5–13

Page 96
Image 96
HP NX9040, NX9030, NX9020, ZE4900 manual Removing a Mini PCI Communications Board