Removing the external chilled water flow valve

1.Remove the external chilled water flow actuator. For detailed instructions, see "Removing the external chilled water flow actuator (on page 33)."

2.Remove the eight bolts surrounding the valve (1), and then remove the valve (2).

Replacing the external chilled water flow valve

1.Replace the valve (1), and then secure the valve with eight bolts (2).

2.Replace the external chilled water flow actuator. For detailed instructions, see "Replacing the external chilled water flow actuator (on page 35)."

External pressure gauge isolation valve

The external pressure gauge isolation valve is located on top of the HP POD 40c NA.

Removal and replacement procedures 36

Page 36
Image 36
HP Performance Optimized Data Center (POD) 40cp manual External pressure gauge isolation valve