4.Slide the hardware bracket to the right along the busway, completely disconnecting it from the busway drop box (2).
WARNING: Use caution when removing and replacing the busway drop box. The drop box weighs approximately 9 kg (20 lb).
5.Rotate the busway drop box 90° so that it is perpendicular to the electrical busway, and then remove the drop box from the electrical busway (3).
Replacing the busway drop box
WARNING: Use caution when removing and replacing the busway drop box. The drop box weighs approximately 9 kg (20 lb).
1.Place the silver drop box bracket on the electrical busway where you want to replace the busway drop box (1).
2.Note the required rotation indicated on the drop box, insert the drop box into the drop box bracket on the electrical busway, and then rotate the drop box 90° until it locks into place (2).
CAUTION: To prevent damage to the drop box and make sure that the drop box engages properly, be sure that the drop box is completely flush to the busway. If a drop box is damaged during installation, do not attempt to
3.Slide the hardware bracket to the left along the busway until it connects to the drop box (3).
Removal and replacement procedures 19
