HP Serviceguard manual Optional Package Modules, Base Modules, Optional Modules

Table 11 Base Modules

Module Name	Parameters (page)
failover	package_name (page 234) *
	module_name (page 234) *
	module_version (page 234) *
	package_type (page 234)
	package_description (page 234) *
	node_name (page 235)
	auto_run (page 235)
	node_fail_fast_enabled (page 235)
	run_script_timeout (page 236)
	halt_script_timeout (page 236)
	successor_halt_timeout (page 237) *
	script_log_file (page 237)
	operation_sequence (page 237) *
	log_level (page 237) *
	failover_policy (page 237)
	failback_policy (page 238)
	priority (page 238) *
multi_node	package_name (page 234) *
	module_name (page 234) *
	module_version (page 234) *
	package_type (page 234)
	package_description (page 234)
	node_name (page 235) *
	auto_run (page 235)
	node_fail_fast_enabled (page 235)
	run_script_timeout (page 236)
	halt_script_timeout (page 236)
	successor_halt_timeout (page 237) *
	script_log_file (page 237)
	operation_sequence (page 237) *
	log_level (page 237)
	priority (page 238) *
system_multi_node	(as multi_node)

Comments

Base module. Use as primary building block for failover packages.

Cannot be used if package_type (page 234) is multi_node or system_multi_node.

Base module. Use as primary building block for multi-node packages.

Cannot be used if package_type (page 234) is failover or system_multi_node.

Base module. Primary building block for system multi-node packages, supported only for applications supplied by HP.

Optional Package Modules

Add optional modules to a base module if you need to configure the functions in question. Parameters marked with an asterisk (*) are new or changed as of Serviceguard A.11.18/19. (S) indicates that the parameter (or its equivalent) has moved from the package control script to the package configuration file for modular packages. See the “Package Parameter Explanations” (page 233) for more information.

Table 12 Optional Modules

Module Name	Parameters (page)
dependency	dependency_name (page 238) *
	dependency_condition (page 239) *
	dependency_location (page 240) *
weight	weight_name (page 240) *
	weight value (page 240) *

Comments

Add to a base module to create a package that depends on one or more other packages.

Add to a base module to create a package that has weight that will be counted against a node's capacity.

Choosing Package Modules 231