Policy_Parameters:

 

 

 

POLICY_NAME

CONFIGURED_VALUE

 

 

Failover

configured_node

 

 

Failback

manual

 

 

 

Script_Parameters:

 

 

 

ITEM

STATUS

MAX_RESTARTS

RESTARTS

NAME

Service

up

0

0

service2

Service

up

0

0

sfm_disk1_monitor

Subnet

up

0

0

15.13.168.0

Generic Resource

up

 

 

sfm_disk1

Node_Switching_Parameters:

 

 

 

NODE_TYPE

STATUS

SWITCHING

NAME

 

Primary

up

enabled

ftsys10

(current)

Alternate

up

enabled

ftsys9

 

NOTE: The Script_Parameters section of the PACKAGE output of cmviewcl shows the Subnet status only for the node that the package is running on. In a cross-subnet configuration, in which the package may be able to fail over to a node on another subnet, that other subnet is not shown; see “Cross-Subnet Configurations” (page 30).

Quorum Server Status

If the cluster is using a Quorum Server for tie-breaking services, the display shows the server name, state and status following the entry for each node, as in the following excerpt from the output of cmviewcl -v:

CLUSTER STATUS

example up

NODE

STATUS

STATE

ftsys9

up

running

Quorum Server Status:

 

NAME

STATUS

STATE

lp-qs

up

running

...

 

 

NODE

STATUS

STATE

ftsys10

up

running

Quorum Server Status:

 

NAME

STATUS

STATE

lp-qs

up

running

CFS Package Status

If the cluster is using the Veritas Cluster File System (CFS), the system multi-node package SG-CFS-pkgmust be running on all active nodes, and the multi-node packages for disk group and mount point must also be running on at least one of their configured nodes. If the cluster is using the Veritas Cluster Volume Manager for raw access to disk groups (that is, without CFS), SG-CFS-pkgmust be running on all active nodes.

NOTE: Check the Serviceguard/SGeRAC/SMS/Serviceguard Manager Plug-in Compatibility and Feature Matrix and the latest Release Notes for your version of Serviceguard for up-to-date information about support for CVM and CFS (http://www.hp.com/go/hpux-serviceguard-docs).

The following is an example of cmviewcl output showing status for these packages:

cmviewcl -v -p SG-CFS-pkg

MULTI_NODE_PACKAGES

PACKAGE

STATUS

STATE

AUTO_RUN

SYSTEM

266 Cluster and Package Maintenance

Page 266
Image 266
HP Serviceguard manual Quorum Server Status, CFS Package Status