HP Serviceguard Mount points, Snapshotmountoptions, Information about the mount options, see

NOTE: By default, the package parameters are commented out. You must uncomment them and specify the values.

snapshot_mount_point	name of the mount point for the snapshot
snapshot_name	Diskgroups/Logical volume pair used to store the
	snapshot image
snapshot_cfs_mount_point	unique name for CFS mount point; supports nested
	mount points
snapshot_mount_options	the CFS mount options for the snapshot. For detailed
	information about the mount options, see the
	mount_vxfs (1m) manpage.

4.Configure the appropriate dependencies (if any) of the snapshot image:

dependency_name	dg2pkg
dependency_condition	dg2pkg	= UP
dependency_location	same_node

5.Check the package configuration file: cmcheckconf -P snap1.ascii

cmcheckconf: Verification completed with no errors found. Use the cmapplyconf command to apply the configuration

6.Apply the packages configuration file: cmapplyconf -P snap1.ascii

Modify the package configuration ([y]/n)? y Completed the cluster update

7.Run the snapshot package: cmrunpkg snap1

Running package snap1 on node node1 Successfully started package snap1 on node node1 cmrunpkg: All specified packages are running

8.Verify the modular package of the mount point for the snapshot(s) running. Also, verify that the file system is mounted:

cmviewcl

CLUSTER	STATUS
cluster1	up
NODE	STATUS	STATE
node1	up	running
node2	up	running
MULTI_NODE_PACKAGES
PACKAGE	STATUS	STATE	AUTO_RUN	SYSTEM
SG-CFS-pkg	up	running	enabled	yes
dg2pkg	up	running	enabled	no
snap1	up	running	enabled	no

bdf

Filesystem	kbytes	used	avail %used		Mounted on
/dev/vg00/lvol3	2686976	629944	1928574	25%	/
/dev/vg00/lvol1	2031616	361600	1565705	19%	/stand
/dev/vg00/lvol5	32636928	1917471 28805207			6% /var

210 Building an HA Cluster Configuration