b.Verify that the line for the screen number 0 (the line containing :0 local) does not contain the -nolisten tcp option. Remove the -nolisten tcp option if present. The line should look like:

:0 local /usr/X11R6/bin/X

c.Enable TCP connections on the X server of the remote client:

SUSE - Edit /etc/sysconfig/displaymanager and set the following options

to yes: DISPLAYMANAGER_REMOTE_ACCESS and DISPLAYMANAGER_XSERVER_TCP_PORT_6000_OPEN.

For example: DISPLAYMANAGER_REMOTE_ACCESS="yes" DISPLAYMANAGER_XSERVER_TCP_PORT_6000_OPEN="yes"

RHEL (for gnome) - Edit /etc/X11/gdm/gdm.conf and set the DisallowTCP

option to false (uncomment if commented)

For example: DisallowTCP=false

d.If you made any changes in the configuration files during the previous steps, reboot the system for the changes to take effect.

2.Run the following command at the command prompt:

# /usr/X11R6/bin/xhost +

Then, set the display to your client. Refer to the documentation for your shell for more information.

•Accessing the Linux host from a remote Windows client - Start up a local X server, connect through xterm to the remote system and set your DISPLAY environment variable appropriately by using the following commands:

# DISPLAY=<ip-address>:displaynumber.screennumber

where <ip-address>is the address of the client from which the Installer script is launched.

#export DISPLAY

For Example:

#DISPLAY=172.168.10.15:0.0

#export DISPLAY

Step 2 - Install the Management Server

If you are installing the management server from a network drive, follow the instructions as described in ”Installing from a Network Drive” on page 64.

IMPORTANT: Run the entire installation from the same X client window. Starting a new X session will result in the loss of environment variables required by the installer.

Keep in mind the following:

•Refer to the release notes for late breaking information.

•Make sure no other programs are running when you install the management server.

•In this release, no RPM entry is created for management server on Linux.

76 Installing the Management Server on Linux