Table 6 Discovery Requirements for Storage Systems (continued)

Element

Discovery Requirements

For Additional Information

 

 

 

HP EVA storage

Discover the server running

See Discovering HP

systems

Command View EVA.

StorageWorks EVA Arrays,

 

 

page 143.

 

 

 

HP XP storage

Discover the server running the

See Discovering HP

systems

SMI-S provider or the built-in

StorageWorks XP Arrays,

 

provider.

page 145.

 

 

 

IBM storage systems

Discover the IBM CIMOM or SVC.

See Discovering IBM Storage

and System Storage

 

Systems or IBM SVCs, page 146.

SAN Volume

 

 

Controller

 

 

 

 

 

Sun StorEdge 3510

Discovered through proxy software

See Discovering Sun StorEdge

 

called Sun StorEdge™

Storage Systems, page 148.

 

Configuration Service.

 

 

 

 

Sun StorEdge 6920

Discover the storage system

See Discovering Sun StorEdge

and 6940

directly.

6920 and 6940 Storage Systems,

 

 

page 149.

 

 

 

Sun StorEdge 6130

Discover the storage system

See Discovering Sun StorEdge

 

directly.

6130 Storage Systems,

 

 

page 149.

 

 

 

Xiotech storage

Discover the storage system

See Discovering Xiotech Storage

systems

directly.

Systems, page 149.

 

 

 

Discovering 3PAR Storage Systems

To discover a 3PAR storage system, the SMI-S server for the 3PAR storage system must be running. By default, the 3PAR SMI-S server is not started on the array. To start the SMI-S server, start the InForm CLI and run the following command:

startcim

This command starts the SMI-S server within a minute or so.

NOTE: You do not need to provide the interop namespace because the management server includes the interop namespace for 3PAR storage systems in its default list.

To discover 3PAR storage systems, enter the following information in HP SIM

•The IP address or system name for the storage system.

•User name of the storage system.

•Password of the storage system.

HP Storage Essentials SRM 6.0 Installation Guide 135