•The server must be running a supported operating system or the upgrade will fail. Refer to the support matrix for a valid operating system.

•Microsoft Internet Explorer 6.0 SP1 or later must be installed or the upgrade will fail.

•TCP/IP must be installed or the upgrade will fail.

•*The upgrade will fail if SNMP and the SNMP trap service is not installed and enabled. The upgrade program tells you SNMP must be enabled and SNMP trap services must be installed. The upgrade will not go beyond a certain point until you enable SNMP and SNMP trap services.

•If insufficient disk space in %Temp% is detected the upgrade will fail. You must have at least 2 GB of free disk space on the drive where %temp% is located.

4.Read the overview information on the Getting Started with an Upgrade screen and click Next. The Upgrade Locations screen is displayed showing the directories in which the management server components are currently installed.

5.Optional. Select the check box to copy your CIM extensions to the management server only if you want to overwrite the existing CIM extension files. You can copy the CIM extensions from the CIM Extension CD manually to the management server at a later time. Note that this option only copies the CIM extension files to the management server. It does not install the CIM extensions on your hosts.

IMPORTANT: The 6.0 CIM extensions are required on any backup manager hosts to continue collecting backup manager discovery data. Build 5.1 CIM extensions on backup manager hosts are not supported after upgrading. See ”Deploying and Managing CIM Extensions” on page 181 for information on installing CIM extensions.

6.Optional. You can change the location of the Oracle database.

7.Click Next to continue. The Verify System Requirements screen is displayed. See the support matrix for complete system requirement details.

NOTE: The Port Availability requirement line may show a warning during an upgrade that can be ignored, as it indicates that the existing management server service has reserved the ports.

8.Click Next. The HP Systems Insight Manager Service Account Credentials screen is displayed. Enter the password for the HP Systems Insight Manager. The user name and domain boxes are pre-filled based on the information entered in the Upgrade Locations screen earlier.

9.Click Next. The Upgrade Summary screen is displayed showing the selected components to be upgraded.

10.Click Upgrade to continue or Previous to make changes to the previous screen or Cancel if you need to make changes to the server. Once you click Upgrade, the upgrade wizard begins migrating the Oracle database and will not allow you to cancel until the migration is complete. The automated Oracle database migration creates a backup of your Oracle 9i database, exports the database, installs Oracle 10g Standard Edition, and imports the database during the upgrade. You can cancel the upgrade once the database migration is complete if desired.

46 Installing the Management Server on Microsoft Windows