Table 1:

Upgrade

New Install

Description

migrateData.sh

Not Applicable

Verifies if the database is

 

 

created properly and imports

 

 

database exported by

 

 

upgradeAppStorManager.sh

Install HP SIM Connector

Install HP SIM

Install SIM connector for Build

 

connector for Build 6.0.0

6.0.0

Steps to Upgrade the Management Server

Step 1 - Read the Support Matrix and Release Notes

Read the support matrix and release notes. Read the support matrix to make sure the servers on which you are upgrading the management server meet or exceed the requirements. Management server requirements are listed on the Manager Platform (Mgr Platform) tab of the support matrix. Also, read the release notes for late breaking issues not covered in the Installation Guide. The release notes and support matrix can be found on the top-level of the management server CD and the CIM extension CDs.

Step 2 - Verify that You Are Running Build 5.1

Service Pack 4 or a Later 5.1 Service Pack

Verify that you have a working Build 5.1, SP4 management server before upgrading to Build 6.0. Existing installations that are at Build 5.1, SP1, Build 5.1, SP2, or Build 5.1, SP3, must upgrade to Build 5.1, SP4 or later prior to upgrading to Build 6.0. In an integrated Storage Essentials/SIM environment, you must also upgrade to the Service Pack 4 connector. If using the HP Kit in an integrated Storage Essentials/SIM environment, you must first install SP3, if you are not currently at SP3 or SP4.

Step 3 - Save Configuration Files for the Global

Change Management Business Tool

Make a copy of the configuration files saved through the Global Change Management Business Tool. The configuration files are not retained after you upgrade the product. These files are located in the “advisors/saved-configuration” area on the management server. Place these files back after the upgrade or reinstall. If you do not use Global Change Management or do not wish to keep the old configurations, you may ignore this step.

Step 4 - Upgrade HP SIM

Upgrade HP SIM in this step. In the case of a dual box installation, the SIM upgrade procedure should be carried out on the server where HP SIM is installed.

•If you are running a version before HP SIM 5.1, you should upgrade HP SIM during this step.

•Stop appstormanager services prior to starting this step.

•Your integrated environment will be non-operational until after the completion of the connector upgrade in a later step.

HP Storage Essentials SRM 6.0 Installation Guide 95