2.In the right pane, click Start Here on the Path Provisioning tab.
3.Select the following from the System Action
Step 1 - Select Storage System
1.Wait for the management server to load the storage systems into the Storage System panel.
2.Select a storage system on which you want to create the metavolume.
NOTE: The S heading in the Storage Systems pane means that only a single selection is allowed.
(HDS only) Select the storage system from which you want to create the LUSE volume.
3.Click the Step 1 button underneath the pane.
Information about the selected storage system, such as its model and IP address is displayed below the Storage System pane. The Host pane becomes populated. Notice in the following pane that some hosts have a red X over their icon. This means the host is not accessible.
Figure 55 Selecting a Storage System
380 Path Provisioning