9.In the Comment field (optional), type a comment for additional information. The information typed into this field is displayed under the Comment column in the Addresses to Discover list (Tools > Storage Essentials > Home > Discovery > Setup).
10.Do not select the Do Not Authenticate option.
11.Click OK.
12.To start discovering elements on the network, click the Start Discovery button on the IP Addresses tab.
Discovering Sun StorEdge 3510 Storage Systems
Before you can discover a Sun StorEdge 3510 storage system, you must set up a Sun StorEdge 3510
The Sun StorEdge™ Configuration Service can be installed in one of the following locations:
•on the same computer as the Sun StorEdge 3510
•on the management server
•on a separate computer
To install the Sun StorEdge™ Configuration Service you must install the following packages:
•Sun StorEdge™ Configuration Service Console (SUNWscsu)
•Sun StorEdge™ Configuration Service Agent (SUNWscsd)
•Sun StorEdge™ Diagnostic Reporter Agent (SUNWscsa)
You must also install the following packages. Contact Sun technical support for information on how to obtain and configure these packages.
•WBEM Solutions J WBEM Server 1.0
•Sun StorEdge™ CIM/WBEM Provider SDK (SUNWagsdk package) - A readme file is installed as part of SUNWagsdk package. Follow the instructions in that readme file.
•Sun StorEdge™ 3510
To discover Sun StorEdge 3510 storage systems, you must discover the Sun StorEdge 3510
•user name and password used for the system running Sun StorEdge 3510
•IP address of the system running Sun StorEdge 3510
Storage Essentials 5.00.01 User Guide 67