Information about the selected storage system, such as its model and IP address is displayed below the Storage System pane. The Host pane becomes populated. Notice in the following pane that some hosts have a red X over their icon. This means the host is not accessible.
Figure 57 Selecting a Storage System
Step 2 - Select a Host
1.Wait for all data to be loaded. You can tell if all data has been loaded when you see the following messages:
•Loading host data finished.
•Loading HSG data finished.
•Loading zone data finished.
The Step 2 button appears disabled until data has been loaded
2.Select a host that is reachable. Keep in mind the following:
•To create a provisioning job for multipathing, click the 
button above the Host pane. Then, select the option for multipathing. When you select this option, you must select the same host for both paths. See ”Host Customize Dialog” on page 404 for more information.
Storage Essentials 5.00.01 User Guide 391