•The following steps provide general information on how to discover an element. See Table 6 on page 31, Table 9 on page 54, and Table 11 on page 96.

•To obtain drive-related statistics, install a proxy host. Ensure the proxy host has at least one LUN rendered by each controller of the array. See ”Obtaining Disk Drive Statistics from Engenio Storage Systems” on page 123 for more information.

•(Discovery from HP SE only) The Do Not Authenticate option is for Engenio storage systems. The Engenio storage systems do not require a password for Get Details. If you want do not want to use the management server for provisioning on Engenio storage systems, you can leave the password field blank and select the Do Not Authenticate option. The management server will still monitor the Engenio storage system; however, you will not be able to do provisioning tasks.

Discovery from HP SIM

To discover a single IP address or DNS name:

1.Select Options > Discovery. Then, click the Manual tab.

2.Select one of the following:

•System Name - Select this option if you want to discover an element by its DNS name.

•IP Address - Select this option if you want to discover an element by its IP address.

3.(Optional) Click More Settings if you want to provide more information for your discovery.

NOTE: Refer to the HP SIM documentation about the additional settings that appear when you click the More Settings button.

4.Click Add System.

HP SIM starts the discovery process.

Discovery from HP SE

To add a single IP address or DNS name to discover:

1.Click Tools > Storage Essentials > Home on the HP SIM home page menu. The Storage Essentials home page opens in a separate web browser window. From the Storage Essentials home page, click Discovery, then click Setup in the upper right pane of the Storage Essentials window.

2.Under Discovery Setup, select Step 1 at the top of the screen.

3.On the IP Addresses tab, click the Add Address button.

4.In the IP Address/DNS Name field, type the IP address or DNS name of the device you want to discover.

5.In the User Name (Optional) field, type the user name. If you are discovering an Engenio storage system, leave this field blank.

This field can also be left blank if the element's user name and password are one of the default user names and passwords.

6.Do one of the following for the password:

•If you do not want to do provisioning on a storage system, leave the Password field blank. For Engenio storage systems, you must also select the Do Not Authenticate option.

Storage Essentials 5.00.01 User Guide 25