using the primary operator panel
CANCEL
Function Cancels all jobs, if pressed when the printer is off line and not in a fault state. Also clears faults and puts the printer in the off line mode.
CANCEL
Action With the printer off line, cancel the current run of labels by pressing once.
Also, if a fault condition persists, press once to clear fault.
Result The printer will then cancel all jobs and clear all imaged and buffered data.
Or, in the case of fault clearing, the printer will go off line without canceling jobs.
note
Pressing the CANCEL key has no effect
when the printer is on line and running.
FEED
FEED
Function Prints any labels that have been imaged and also the current label in progress.
Action With the printer off line, press once to print labels.
Result The printer will print any labels that have been imaged and also the current label in progress.
note
If no label is being processed, a blank page will print.
Operator's Guide | 3 |
