loading media
te
Printers have been built with two types of standard media hubs: metal and plastic. From the diagrams below, follow the media loading instructions which match your printer.
te
Do not use the media retainer if the media supply roll is wider than 4 inches.
METAL HUBa. If you are using media with a 3º core, place the 3º media core adapters on the media hub assembly.
b. Place the media supply roll on the media hub assembly. Slide the media retainer against the supply roll and tighten the thumb screw.
PLASTIC HUBa. Place the 3º media supply roll on the media hub assembly.
b. Slide the media retainer against the supply roll and tighten the thumb screw.
c.Skip the next step and continue with step 7.
Operator's Guide | 7 |