unloading media
6To remove roll±fed media, proceed as
follows:
a.Roll the media onto the media hub or onto the rewind hub, as appropriate.
b.If you have rolled the media onto the media hub, slide the roll of media off the hub.
3±Inch Core |
Adaptors |
Media Hub |
Assembly |
Thumbscrews
c.If you have rolled the media onto the rewind hub, lower the lower
Unroll the media from the hub, and remove the clasp
d.Lift and snap the lower
Media
Supply Roll
Media Hub | Media |
Assembly | Retainer |
Rewind Hub
7To remove fan±folded media, proceed as follows:
a.If the rewind hub was not being used, simply pull the media through
the loading slot and out of the printer.
Go on to step 8.
b.If the rewind hub was being used, finish rolling the media onto the hub.
Operator's Guide | 15 |
