Selecting Gap Sensor
GAP SENSOR selects the type of media used for printing. The options for this selection are as follows:
•TRANSMISSIVE (see±through)
•REFLECTIVE (black stripe)
•NONE (default)
1Press ON LINE/PAUSE to place the printer in the off line mode.
OFFLINE IGP/PGL
2Press 
to enter the configuration menus.
3Press 
to reach the printer control menu.
4Press 
to enter the printer control menu.
5 Press | to reach the gap sensor |
menu. |
|
6Press 
to enter the gap sensor menu.
7 Press | to view the desired setting. |
8Press ENTER to select the setting.
9Press ON LINE/PAUSE to place the printer in the on line mode.
USER CONFIG PAPER CONTROL
USER CONFIG PRINTER CONTROL
PRINTER CONTROL
Media Handling
PRINTER CONTROL Gap Sensor
Gap Sensor
None *
Gap Sensor
None *
Gap Sensor
Reflective
Gap Sensor
Transmissive
Gap Sensor
Reflective *
ONLINE
IGP/PGL
24 | Operator's Guide |