Hook | HP T3204 specification

7Raise the J-hook upward, and place the end of the ribbon over the take-up hub.

8Slide the J-hook back into place, as shown. While holding the ribbon take-up

hub, rotate the J-hook counterclockwise to latch.

Turn the take-up hub until all the ribbon slack is removed.

9Raise the hinge plate, and lock the printhead by rotating the printhead latch clockwise.

10Close the media supply door.

11Press ON LINE/PAUSE to enable printing.

Take-Up Hub

Ribbon

Printhead	Hinge
Latch	Plate

J-Hook

Operator's Guide