ezUpdate for XPe

Download Path

Anon-editable box displaying the path (fully-qualified path) that the thin client will use to find its ezUpdate image on the server. The download path is dynamically constructed from:

The FTP Server Path (see description below)

A path structure pre-set for the thin client’s specific software build (for example: “/neoware/xpe/256P640/”)

And the Appliance Profile name (see description below)

FTP Server Path

The fully-qualified path (not a name relative to another folder) to the location of your ezUpdate server. It must begin with

ftp:// and can be configured using the server name or its IP address. This field is disabled if the ‘Get Server Path URL from DHCP server (tag #)’ checkbox (see description below) is checked.

Examples:

ftp://ftp.mycompany.com

ftp://198.168.5.1

Appliance Profile field

The Appliance Profile field identifies which image on the server to use in the event an update is necessary. The default profile name is “factory.”

Examples:

factory sales support

Update Version

The Update Version field identifies the software image version cur- rently running on the local thin client. This value is used to check the version for the configured profile on your ezUpdate server. If the local and server versions match, no update is performed. A value of

54

Page 64
Image 64
HP TeemTalk Terminal Emulator 10 E-License manual Download Path, FTP Server Path, Examples, Appliance Profile field