|
| Diagnostic Messages |
|
| Error Messages |
| CAUSE | Missing assignment operator = for |
|
| assigning one bit field to another. |
| ACTION | Insert assignment operator = for bit |
|
| field assignment. |
1070 | MESSAGE | Bit range must be within |
|
| {0..31} |
| CAUSE | Range specified in bit field is not in |
|
| the legal range. |
| ACTION | Ensure bit field range is within the |
|
| range 0 to 31. |
1071 | MESSAGE | Opening brace expected in bit |
|
| range designator |
| CAUSE | Missing opening brace to specify bit |
|
| field |
| ACTION | Use correct format for bit field |
|
| specification. |
1072 | MESSAGE | Ending brace expected in bit |
|
| range designator |
| CAUSE | Missing closing brace to specify bit |
|
| field |
| ACTION | Use correct format for bit field |
|
| specification. |
1073 | MESSAGE | Unmatched .ENDM |
| CAUSE | No .MACRO directive was recognized |
|
| as corresponding to the .ENDM |
|
| directive. |
| ACTION | Either remove the unmatched .ENDM |
|
| directive or insert a .MACRO directive |
|
| in an appropriate position preceding |
|
| the .ENDM directive. |
1074 | MESSAGE | Illegal expression type for |
|
| plabel |
| CAUSE | More than one label was found in a |
|
| plabel expression. |
Chapter 8 | 167 |