|
| Diagnostic Messages |
|
| User Warning Messages |
| ACTION | Check protections on |
|
| /opt/langtools/lib/sched.models |
|
| and /usr/lib/sched.models. If |
|
| neither file exists, contact your HP |
|
| Service Representative. |
7003 | MESSAGE | Improper argument to +DA |
|
| option. (7003) |
| CAUSE | An improper argument was given to |
|
| the +DA or +DS option. |
| ACTION | The +DAmodel is either a model |
|
| number (such as 877 or I50, or one of |
|
| the |
|
| designations 1.0 or 1.1. The |
|
| +DSmodel is either a model number |
|
| (such as 877 or I50), or one of the |
|
| |
|
| PA7100). See the |
|
| /opt/langtools/lib/sched.models |
|
| file for model numbers, |
|
| architectures, and processor names. |
7004 | MESSAGE | Debug information may be |
|
| corrupt: %1s unresolvable |
|
| reference %2s (7004) |
| CAUSE | Internal compiler error. |
| ACTION | Report error to your HP Service |
|
| Representative. |
7005 | MESSAGE | Unrecognized opcode %1s |
|
| (7005) |
| CAUSE | The opcode specified in an inline |
|
| assembly call was invalid. |
| ACTION | Check the architecture instruction |
|
| set specification to determine valid |
|
| opcode names. |
7006 | MESSAGE | Improper completer ,%1s given |
|
| for opcode %2s (7006) |
Chapter 8 | 179 |