|
| Diagnostic Messages |
|
| Error Messages |
|
| value for the month, |
|
| (Jan=1,…Dec=12) and yyyy is the |
|
| year. |
| ACTION | Change the parameter to .SHLIB to a |
|
| valid value. |
1088 | MESSAGE | Floating point register %s is |
|
| out of range for %s,SGL |
| CAUSE | The |
|
| valid for this opcode. The multiops |
|
| FMPYADD,SGL and FMPYSUB,SGL |
|
| require that the operands be single |
|
| precision |
|
| the range %fr16L,%fr16R .. |
|
| %fr31L,%fr31R. Specifying a |
|
| register below %fr16 will result in |
|
| this error message. |
| ACTION | You must use single precision |
|
| |
|
| %fr16L,%fr16R .. |
|
| %fr31L,%fr31R when using single |
|
| precision FMPYADD or FMPYSUB. |
1089 | MESSAGE | Revision level must be |
|
| specified for .LEVEL |
|
| directive |
| CAUSE | A .LEVEL directive was missing an |
|
| architecture level value. |
| ACTION | You must specify a valid architecture |
|
| level of 1.0, 1.1, or 2.0. |
1090 | MESSAGE | Value of %1s must be in the |
|
| range |
|
| [%2s..%3s] |
| CAUSE | The immediate value %1s is |
|
| constrained to be in the range |
|
| %2s..%3s for the current instruction. |
| ACTION | Use a different instruction that |
|
| allows for a larger range, or use a |
|
| register to hold the value %1s. |
Chapter 8 | 171 |